• Fusion

Course 1 - Haas and Autodesk Fusion - Blueprints, CAD, CAM, and CNC

Outline
1

Getting started

Module overview
Overview
Get the software
Get the Haas tooling
Course resources
2

Introduction to blueprints

Module overview
Views and projections
Dimensions and tolerance
Title block information
GD & T symbols
Stock and work holding
Practice exercise
Challenge exercise
Module quiz
3

Creating a digital CAM setup

Module overview
Indicate a vise
Define stock and WCS
Review a program
Create CAM documentation
Practice exercise
Challenge exercise
Practice exercise
Module quiz
4

Setting up a CNC mill

Module overview
Tool and work offsets
Load an NC program into control
Dry run CNC program
Run CNC program
Inspect a part
Module quiz
5

Creating a CAM setup for a second operation

Module overview
Define stock and WCS for OP2
Review a program and create document
Practice exercise
Challenge exercise
Module quiz
6

Machining a part in soft jaws

Module overview
Set up and run OP2
Inspect operation 2
Module quiz
7

Course challenge exercise

Module overview
Course challenge
8

Final test

Module overview
Start your final test
  • Up next:Load an NC program into control

Tool and work offsets

0:00 / 0:00

After completing this video, you’ll be able to:

  • Assemble tools and tool holders.
  • Properly set up tool offsets.
  • Properly locate G54.

Video quiz

1. What is the G-code for WCS 1 in the Work Offset page?

Error: Select an answer

Error: 1/1 questions unanswered
1/1 questions unanswered
  • Up next:Load an NC program into control

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

No, thanks, I don't want support from ${RESELLERNAME}
${RESELLERNAME}